Commonly used plate surface: 8K mirror, 2B smooth surface, sanding (wire drawing, sand drawing), titanium, etc, the surface price slightly different.

The theme that stainless steel sculpture can make and modelling are very extensive, content is extremely rich, arrive big sculpture of city square giant, small the adorn article sculpture that reachs a few centimeters big, can make, here differ enumerate.Stainless steel sculpture components: sculpture body (shape), internal skeleton, embedded parts (base) three parts, which is the basic component, not every sculpture has these three parts.As the above picture of Pisces is made of thick plates without a skeleton inside, it is directly spliced by plates.Small ornamental ornaments are composed of body and base, and the hanging frame is only a part of the body.There are also some simple sculptures. The embedded parts are the sculpture body, that is, the body is bought underground as the embedded parts of the sculpture.

Large sculptures are usually embedded with a pedestal bearing the name of the sculpture and on the back a description of the sculpture: the designer, the date of the sculpture and the meaning of the sculpture. Large sculptures are usually placed in the open area at the entrance of city squares, gardens and scenic spots for people to view and take photos.

The production process of stainless steel sculpture is forging and welding, and its flow is as follows: 

1. Design: according to the requirements of the producer and combined with the surrounding environment factors, the sculpture designer shall design the intention drawing or effect drawing, and determine the specification and size after the producer confirms and revises it for many times.

2. Drawing deepening, namely making deepening drawing, also known as production and processing drawing. The size of each detail is marked on the drawing, which will be confirmed by the producer again and archived after confirmation.

3. Making demo: the demo is a reduced version of the sculpture after molding. The first demo is to let the producer confirm the modeling of the sculpture and feel the sculpture more directly, and put forward Suggestions for modification of the sculpture. The second is the production master according to the small sample, according to the scale of the scale of the production into a one mold tire, for the production of sculpture mold mold. Mold tires are divided into two types: clay tires, namely, clay draft and foam. Mold tires are repeatedly modified and confirmed according to the production drawings, and are made into relatively rigid molds after meeting the requirements.

4. Cutting and marking: according to the characteristics of the mold, separate different parts of the mold into several small pieces, label them, cut the sample after the label, post them on the mold with paper, cut the sample paper according to the size of the cutting and marking, and open the material according to the sample paper.

5. Forging: after the material is opened, the stainless steel sheet is repeatedly forging and punching, repeatedly comparing with the mold, until it is completely consistent with the mold.

6. Welding (splicing) : splicing the forging pieces together according to the serial number, and the welding is firm.

7. grinding: grinding the welding point smooth, this process is a slow work, first use coarse sandpaper grinding, then use fine sandpaper grinding, until can not see the joint, the whole sculpture one integrated whole so far.

8. surface treatment: one is the original color, is the color of the raw material itself; The second is spray paint, commonly used fluorocarbon paint, namely automotive paint, according to the production requirements can be sprayed into a wide range of colors.　　

9. Packaging, transportation and installation are not detailed.

Such a perfect sculpture is produced, the production process is complicated, the value of the sculpture not single measured by raw materials, the sculpture is a kind of art, both in design concept and humanistic thought, makers also paid a sweat, a piece of elegant sculpture is not a person, is the crystallization of the collective creation and production, so can't according to the weight to calculate the price and value. Stainless steel sculpture is liked by people and favour, it is simple sense intense, colour and lustre is bright, of original quality color by silvery white, titanium aureate, give a person the sense of high elegance; Spray into fluorocarbon paint is also bright color, in the sunlight, dazzling. Stainless steel sculpture, large sculpture can be placed in the city square, parks, schools, scenic spots, government, enterprise square or courtyard, commercial blocks and other places, to swear the master's theme and solemn. Small stainless steel act the role ofing tastes sculpture to put in the home, revealing the hobby of host, savour, knowledge to wait.

With the decrease of the price of raw materials and the maturation of the production technology, the application of stainless steel sculpture will usher in the glorious period and will become the new favorite of The Times.